Thursday 29 June 2017

Emery paper and masking tape

I have been making slow progress over the last few months with two 3D printed Diesels, a Narrow Planet Baguley-Drewry and a CWR Hunslet, both as used at RNAD depots. I was keen to get a good surface finish so spent much time with fine emery paper, then a coat of primer, more rubbing down, this was repeated 4 or 5 times until I was happy the print lines were gone. These were both good quality prints, but the effort in surface preparation is worthwhile.

The recent fine weather was a good chance to spray with the top coat - I chose Halfords enamel dark green, as I've used for other locos, and looks rather smart. The rattle cans give a good finish with little effort, so I decided to spray the black frames and roof too.

IMG_3316

This is the first time I've used masking to spray different colours, and I was very pleased with the result. It helps that the break is between body and footplate so lining up the tape straight is easy, and there's little chance of bleed under the tape. I used Tamiya tape (yellow) for the edges, which sticks well with a clean edge but low tack, and "domestic" masking tape for covering the bulk of the model in between.

IMG_3314

After spraying a few coats of Halfords black enamel, the exciting bit is peeling back the tape!

IMG_3311

The Tamiya tape was carefully pulled away with tweezers. I'm very pleased with that finish!

IMG_3313

You may notice I haven't yet fitted the etch components including the bonnet sides, I thought it might be easier to paint this way. The etch has been blackened, primed, and painted separately.

So now the details are being brush painted with enamels. Buffer beams get a coat of white followed by two of red (I considered yellow and possibly even wasp-stripes, but I do like red with the green). Cab interiors are cream. You may notice another loco has made it to the paint shop too...

IMG_3317


Monday 12 June 2017

Urban Transport - With a difference!

Back in May half-term we had a holiday in Italy, and made a couple of day trips into the nearby city - Venice. Everyone knows Venice is an unusual city in having canals instead of roads, and you probably picture the stereotypical image of the traditional Gondolas in a serene setting. Of course the truth is a busy and sometimes congested city - which as someone interested in transport generally, I found quite fascinating.

IMG_3209

Here's the Grand Canal - the main thoroughfare of the city - right outside the station (far right behind the bridge). I can't see a Gondola, but there are at least 10 water-taxi's visible, and three Vaporetto's - these are the water busses, the public transport system of this city. The one outside the station to the right is just departing from the bus-stop, the yellow and grey shelter on a pontoon. I'll come back to the yellow craft in the centre later.

IMG_3191

Here's a typical Vaporetto that would operate on the Grand Canal and to nearby islands. The Vaporetto's are the Underground system of Venice, albeit with a better view, providing a frequent service through the city and the "suburbs" around the wider lagoon for residents, and tourists too. This one holds over 200 passengers, the large gate behind the driver's cabin allowing commuters to board and leave the craft quickly at the stops, which have near-level entry platforms (floating) and modern electronic ticket systems. Routes are numbered and colour coded, with a London-Underground style schematised route map, making travel around the city easy.

IMG_3181

Here are a couple of smaller Vaporettos passing in Murano, an adjacent island, which operate the less busy routes and use narrower canals. I think they are more attractive boats though they are still highly functional, with the wide gates and standing areas. Meanwhile much larger boats operate the commuter routes around the lagoon, up to triple-deck vessels carrying 900+ people as we used to get into the city.

IMG_3184

The water taxi's are all to the same, elegant design. The driver (is that the right term?) is up front where passengers can board, there is then a comfortable cabin and behind that an open deck. Here I spotted a boatyard with one out of the water, while the one in the foreground is entering the strops used by the crane to hoist them out.

IMG_3050

At last, a quiet canal with a Gondola! But what's that noise? The bin-lorry doing the rounds, but of course this is a different sort of garbage truck. I find the working boats more interesting than the touristy Gondolas. Note the driver-operated crane for the wheelie-bin, which has bottom doors to ease emptying into the barge. Beyond is a delivery barge, the Venetian equivalent of a Transit van, mostly seen carrying drinks and food (in refrigerated versions) to the cafe's and hotels, though I did see one delivering a new kitchen and another with a sofa on it...

IMG_3202

Here's another delivery barge (with it's own crane) being passed by a police boat - of course in this town the police must use boats too! It has a blue flashing light and siren horns on the bow, with a powerful headlight. I wonder if they have a radar gun?

IMG_3094

Another police boat, this time Carabinieri. I'm confused by the multiple Italian police forces, but this one is either more important or better funded than the Polizia Locale, as the boat looks more sleek...

IMG_3036

The police aren't the only emergency service that use the canals, here's an Ambulance (there was one in the picture at the top of the post too). It's fully equipped with medical staff, sirens, and a radar, and certainly seem able to travel at quite a pace.

Oh, and where do you go if you run out of fuel?

IMG_3183